This project shows how to install a bi-fold closet door in this update of How To Build a Basement Closet. The closet door jambs and casing were installed in the previous project. Bi-Fold Closet Door Installation I purchased two Masonite “Full Louver Prefinished White Plantation Closet Door Bi-Fold” 24 in. by 80 in. door units [...]
This project shows how to install door jambs and casing for a bi-fold door in this update of How To Build a Basement Closet. This series is continued from the Plywood Cap & Outside Corner Moulding Installation. Bi-Fold Doors, Door Jambs and Door Casing The materials for finishing the basement closet door are: Two bi-fold door [...]
This product review is continued from Part 2. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
This Chamberlain® belt drive garage door opener product review is continued from Part 1. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
I replaced a 10 year old noisy chain drive garage door opener with a Chamberlain® Whisper Drive garage door opener featuring MyQ™ Technology with Battery Backup and am pleased to write this product review. The Chamberlain® Whisper Drive with was true to the company claims “Quiet, Fast, Smooth”. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
This project is continued from Part 1. Keypad and Inside Mounting Plate Installation It helps to layout the parts on the installation instructions to familiarize yourself and orient the parts for Steps 5 through 8. The black cam in the inside mounting plate must be in the “down” position as shown, if it isn’t turn [...]
This project show how to install a Schlage® Keypad Deadbolt lock, model # BE365 for keyless door access. The keyless deadbolt is a real convenience and easy to install. The Schlage Keypad Deadbolt is available in a 8 different finishes to match your current door hardware. This particular model is the Plymouth design with a [...]
This project is continued from Part 3. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
This project is continued from Part 2. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
This project is continued from Part 1. Having taken off the brick mould, I removed several screws that fastened the old door frame to the 2×4 jack studs in the wall. Next, I cut the caulk lines between the door frame and interior moulding. The door frame was tapped out with a hammer and wood [...]
Recent Comments