HandymanHowto.com

How to Finish a Basement Bathroom – The Complete Series

This is the final update and compendium of the “How to finish a Basement Bathroom” project series for the Do-It-Yourself handyman or homeowner. Links to each construction phase of the project are summarized below, starting from the bare walls to the finished bathroom. Bookmark It!

Continue reading...

Finishing a Basement Bathroom – Part 11

A high water alarm is installed in this installment of the series. (Click here for the previous installment of this project.) The purpose of a high water alarm is to notify you if the something is wrong and the sewage pump is not working so you can stop using the bathroom before the sewage basin overflows. [...]

Continue reading...

Finishing a Basement Bathroom – Part 10

This is a continuation of Part 9 of the project. The 2 inch PVC piping for the sewage basin air vent was easy to install: Measure Cut Dry fit the PVC pipe and fittings Cement together with PVC glue Fortunately a vent line to the roof was roughed in when the home was built so I only had to make [...]

Continue reading...

Finishing a Basement Bathroom – Part 9

The sewage ejector pump and sewer plumbing connections are made in this exciting episode of the project! Actually, I wasn’t looking forward to cutting open the sewer line to install the Tee-fitting for basement bathroom sewer hookup. As it were, it turned out to be a pleasant “dirty job”. Liberty Sewage Pump I bought a new Liberty [...]

Continue reading...

Finishing a Basement Bathroom – Part 1

I bought a house with an unfinished bathroom in the basement. The builder had roughed in the electrical and plumbing connections, including the sewage basin. The remaining tasks to finish the basement bath are: Obtain a building permit. Paint the walls. Install a ceiling ventilation fan. Install a vent to the outside for the fan. Build the shower stall. Tile the shower [...]

Continue reading...