HandymanHowto.com » branch circuit http://www.handymanhowto.com Home improvement, maintenance and repair projects. Sat, 21 Jan 2012 13:17:38 +0000 en hourly 1 http://wordpress.org/?v=3.3.1 How to Wire an Electrical Outlet Under the Kitchen Sink – Part 8 http://www.handymanhowto.com/2012/01/15/how-to-wire-an-electrical-outlet-under-the-kitchen-sink-part-8/ http://www.handymanhowto.com/2012/01/15/how-to-wire-an-electrical-outlet-under-the-kitchen-sink-part-8/#comments Sun, 15 Jan 2012 16:44:34 +0000 Bob Jackson http://www.handymanhowto.com/?p=9288

This project is continued from Part 7. At this point the circuit wiring is complete for the under kitchen sink outlet and I turned on the electricity at the 150 AMP service disconnect switch at the outdoor electric meter box. Under Sink Electrical Outlet – Circuit Testing Ground Fault Circuit Breaker Testing: Testing the ground [...]

Copyright © 2012 HandymanHowTo.com   Reproduction strictly prohibited.

]]> http://www.handymanhowto.com/2012/01/15/how-to-wire-an-electrical-outlet-under-the-kitchen-sink-part-8/feed/ 0 How to Wire an Electrical Outlet Under the Kitchen Sink – Part 7 http://www.handymanhowto.com/2012/01/14/how-to-wire-an-electrical-outlet-under-the-kitchen-sink-part-7/ http://www.handymanhowto.com/2012/01/14/how-to-wire-an-electrical-outlet-under-the-kitchen-sink-part-7/#comments Sun, 15 Jan 2012 02:17:45 +0000 Bob Jackson http://www.handymanhowto.com/?p=9203

This project is continued from Part 6. Since I’ll be working in the main circuit breaker panel, I shutoff the electricity to the house at the 150 AMP main disconnect on the outdoor electric meter box. Do not attempt to work on the circuit breaker panel unless the electricity is OFF because you can be [...]

Copyright © 2012 HandymanHowTo.com   Reproduction strictly prohibited.

]]> http://www.handymanhowto.com/2012/01/14/how-to-wire-an-electrical-outlet-under-the-kitchen-sink-part-7/feed/ 0 How to Wire an Electrical Outlet Under the Kitchen Sink – Part 6 http://www.handymanhowto.com/2012/01/14/how-to-wire-an-electrical-outlet-under-the-kitchen-sink-part-6/ http://www.handymanhowto.com/2012/01/14/how-to-wire-an-electrical-outlet-under-the-kitchen-sink-part-6/#comments Sun, 15 Jan 2012 02:16:05 +0000 Bob Jackson http://www.handymanhowto.com/?p=9171

This project is continued from Part 5. Having fished a new run NM-B 12/2 cable from the circuit breaker panel through the crawlspace to the kitchen sink cabinet, I’m ready to wire the junction box and electrical receptacle. The materials used are illustrated in this photo: Under Sink Electrical Outlet Material List Referring to the [...]

Copyright © 2012 HandymanHowTo.com   Reproduction strictly prohibited.

]]> http://www.handymanhowto.com/2012/01/14/how-to-wire-an-electrical-outlet-under-the-kitchen-sink-part-6/feed/ 0 How to Wire an Electrical Outlet Under the Kitchen Sink – Part 5 http://www.handymanhowto.com/2012/01/14/how-to-wire-an-electrical-outlet-under-the-kitchen-sink-part-5/ http://www.handymanhowto.com/2012/01/14/how-to-wire-an-electrical-outlet-under-the-kitchen-sink-part-5/#comments Sun, 15 Jan 2012 02:14:26 +0000 Bob Jackson http://www.handymanhowto.com/?p=9139

This project is continued from Part 4. Having removed the old branch circuit wiring and electrical outlet, I’m ready to pull nylon fish tape from the kitchen sink cabinet through the basement crawlspace back to the circuit breaker panel. This is a 100 foot spool of 3/8 inch diameter fish tape. Pull Fish Tape for [...]

Copyright © 2012 HandymanHowTo.com   Reproduction strictly prohibited.

]]> http://www.handymanhowto.com/2012/01/14/how-to-wire-an-electrical-outlet-under-the-kitchen-sink-part-5/feed/ 0 How to Wire an Electrical Outlet Under the Kitchen Sink – Part 4 http://www.handymanhowto.com/2012/01/14/how-to-wire-an-electrical-outlet-under-the-kitchen-sink-part-4/ http://www.handymanhowto.com/2012/01/14/how-to-wire-an-electrical-outlet-under-the-kitchen-sink-part-4/#comments Sun, 15 Jan 2012 02:13:03 +0000 Bob Jackson http://www.handymanhowto.com/?p=9124

This project is continued from Part 3. Having disconnected the old NM-B 14/2 cable from the circuit breaker panel, I stood a ladder on the wall to remove any cable staples and ready for pulling out the cable. GFCI Outlet and Branch Circuit Cable Removal Working from the extension ladder setup on the other side [...]

Copyright © 2012 HandymanHowTo.com   Reproduction strictly prohibited.

]]> http://www.handymanhowto.com/2012/01/14/how-to-wire-an-electrical-outlet-under-the-kitchen-sink-part-4/feed/ 0 How to Wire an Electrical Outlet Under the Kitchen Sink – Part 3 http://www.handymanhowto.com/2012/01/14/how-to-wire-an-electrical-outlet-under-the-kitchen-sink-part-3/ http://www.handymanhowto.com/2012/01/14/how-to-wire-an-electrical-outlet-under-the-kitchen-sink-part-3/#comments Sun, 15 Jan 2012 02:11:38 +0000 Bob Jackson http://www.handymanhowto.com/?p=9104

This project is continued from Part 2. Ground Fault Circuit Breaker I bought an Eaton Cutler-Hammer Type BR 20 AMP Ground Fault Circuit Breaker, Part # GFCB120CS, that is approved for my Cutler-Hammer BR3040L200 panel for the new under kitchen sink branch circuit. The Ground Fault Circuit Breaker (GFCB) sells for about $38 at my [...]

Copyright © 2012 HandymanHowTo.com   Reproduction strictly prohibited.

]]> http://www.handymanhowto.com/2012/01/14/how-to-wire-an-electrical-outlet-under-the-kitchen-sink-part-3/feed/ 0 How to Wire an Electrical Outlet Under the Kitchen Sink – Part 2 http://www.handymanhowto.com/2012/01/14/how-to-wire-an-electrical-outlet-under-the-kitchen-sink-part-2/ http://www.handymanhowto.com/2012/01/14/how-to-wire-an-electrical-outlet-under-the-kitchen-sink-part-2/#comments Sun, 15 Jan 2012 02:10:08 +0000 Bob Jackson http://www.handymanhowto.com/?p=9089

This project is continued from Part 1. Now that I’ve traced the old branch circuit, it’s time to disconnect the power before replacing the circuit breaker and wiring. The 150 AMP service disconnect on my home is on the outdoor electric meter box. Flipping this switch cuts off power to the entire house and circuit [...]

Copyright © 2012 HandymanHowTo.com   Reproduction strictly prohibited.

]]> http://www.handymanhowto.com/2012/01/14/how-to-wire-an-electrical-outlet-under-the-kitchen-sink-part-2/feed/ 0 How to Wire an Electrical Outlet Under the Kitchen Sink – Part 1 http://www.handymanhowto.com/2012/01/14/how-to-wire-an-electrical-outlet-under-the-kitchen-sink-part-1/ http://www.handymanhowto.com/2012/01/14/how-to-wire-an-electrical-outlet-under-the-kitchen-sink-part-1/#comments Sun, 15 Jan 2012 02:09:16 +0000 Bob Jackson http://www.handymanhowto.com/?p=9033

This project explains how to install a Ground Fault Circuit Interrupt (GFCI) circuit breaker, branch circuit and electrical outlet under a kitchen sink for an instant hot water dispenser.  The Ground Fault Circuit Breaker (GFCB) branch circuit is summarized in this wiring diagram: Compare the above wiring diagram to the new junction box and single [...]

Copyright © 2012 HandymanHowTo.com   Reproduction strictly prohibited.

]]> http://www.handymanhowto.com/2012/01/14/how-to-wire-an-electrical-outlet-under-the-kitchen-sink-part-1/feed/ 0 How to Install a Hardwired Smoke Alarm – Part 3 http://www.handymanhowto.com/2010/12/16/how-to-install-a-hardwired-smoke-alarm-part-3/ http://www.handymanhowto.com/2010/12/16/how-to-install-a-hardwired-smoke-alarm-part-3/#comments Fri, 17 Dec 2010 02:20:48 +0000 Bob Jackson http://www.handymanhowto.com/?p=6784

This project is continued from Part 2. A second Kidde/Firex® Dual Sensor (Ionization and Photoelectric) AC powered hardwired smoke alarm will now be installed in the living area of the finished basement. The smoke alarm, NM-B 14/3 cable roll and old work electrical box are shown here: Smoke Alarm Wiring Diagram The NM 14/3 branch [...]

Copyright © 2012 HandymanHowTo.com   Reproduction strictly prohibited.

]]> http://www.handymanhowto.com/2010/12/16/how-to-install-a-hardwired-smoke-alarm-part-3/feed/ 0 How to Install a Hardwired Smoke Alarm – Part 2 http://www.handymanhowto.com/2010/12/16/how-to-install-a-hardwired-smoke-alarm-part-2/ http://www.handymanhowto.com/2010/12/16/how-to-install-a-hardwired-smoke-alarm-part-2/#comments Fri, 17 Dec 2010 02:19:08 +0000 Bob Jackson http://www.handymanhowto.com/?p=6773

This project is continued from Part 1. The smoke alarms in my house are 10 years old and will be replaced with new Kidde/Firex® Dual Sensor (Ionization and Photoelectric) 120VAC powered hardwired alarms with battery backup. I chose the Consumer Reports #1 rated Kidde PI2010 alarm, which is widely available at home improvement stores for [...]

Copyright © 2012 HandymanHowTo.com   Reproduction strictly prohibited.

]]> http://www.handymanhowto.com/2010/12/16/how-to-install-a-hardwired-smoke-alarm-part-2/feed/ 0