The plywood closet cap is installed in this update of How To Build a Basement Closet. This project is continued from Basement Closet Drywall Finishing. Closet Light Electrical Permit Inspection I filed for a building permit to cover the new electrical circuit for the closet light and left the 2×4 wall and closet ceiling open [...]
This project is continued from Part 7. At this point the circuit wiring is complete for the under kitchen sink outlet and I turned on the electricity at the 150 AMP service disconnect switch at the outdoor electric meter box. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
This project explains how to install a Ground Fault Circuit Interrupt (GFCI) circuit breaker, branch circuit and electrical outlet under a kitchen sink for an instant hot water dispenser. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
This is the final update of the “How to finish a Basement Bathroom” project series for the Do-It-Yourself handyman or homeowner. Links to each construction phase of the project are summarized below, starting from the bare walls to the finished bathroom. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
Guardian 30,000 watt Standby Generator After several near misses by hurricanes and listening to the experiences of people who had no power for days or weeks, I decided to get a propane/natural gas standby electric generator to power the entire house. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
Recent Comments