HandymanHowto.com » chisel

How to Fix Sagging French Doors – Part 4

Bob Jackson — Fri, 30 Oct 2009 01:34:48 +0000

This project is continued from Part 3. Having cut the mortises for the new Hager BB1279 ball bearing door hinges, I’m ready to attach the new hinges to the door. A long aluminum channel that doubles as a rip fence to cut plywood with my circular saw is used to align the hinges. Install the [...]

How to Fix Sagging French Doors – Part 3

Bob Jackson — Fri, 30 Oct 2009 01:33:22 +0000

This project is continued from Part 2. With the French Door removed from the doorway, placed in a jig on it’s side to hold it securely, and the old hinges removed, I’m now ready to install the new Hager BB1279 ball bearing hinges. The Hager hinge has square leaves, but the mortise is radiused (i.e. [...]

How to Fix Sagging French Doors – Part 2

Bob Jackson — Fri, 30 Oct 2009 01:32:21 +0000

This project is continued from Part 1. To install the new hinges, the French Door will have to be removed and stood on it’s edge in the workshop. A door is a large awkward item, so I made a pair of jigs out of scrap 2×4′s and 3 inch wood screws to hold the door [...]

How to Fix Sagging French Doors – Part 1

Bob Jackson — Thu, 29 Oct 2009 00:02:21 +0000

The basement patio French Doors were sagging, resulting in a torn weatherstrip on the active door and a 1/2 inch gap in between the two doors. To fix the problem I replaced the hinges with heavy duty ball bearing units made by Hagar Co. The Hager hinges feature heavy gauge metal and ball bearings that [...]

How to Fix a Sagging Door

Bob Jackson — Sun, 12 Oct 2008 16:50:35 +0000

The front door was sagging, making it hard to close the door because it would contact the jamb and threshold. The gap is clearly visible in the following photo. Required Tools The following tools are required for this project: Carpenter’s square Carpenter’s level Pencil Wood chisel – 1 inch wide Cordless drill Hammer Philip’s screw [...]