This project explains how to extend power from an existing wall outlet with Wiremold® surface mount raceway and wire the electrical boxes in this installment of How To Build a Basement Closet. This project is continued from wiring the light switch. How to Extend Power from an Existing Wall Outlet At this point in the basement [...]
This project is continued from Part 1. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
This tutorial explains how to install a Leviton ODS10 Occupancy Sensor Wall Switch that is compatible with any light, including Compact Fluorescent Lamps (CFL) and incandescent light bulbs. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
This project is continued from Part 3. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
This project is continued from Part 1. Shut Off The Electricity Before doing any work, I verified the wire was “live” with the non-contact voltage detector. The purpose here was two fold: 1) To confirm the battery operated voltage detector was working; and 2) To watch the detector go silent when the electricity is shut [...]
This project is continued from Part 3. The Waste King® Legend L-8000 garbage disposer has a plug in electrical cord, however my old disposal unit was the hardwired type. I therefore needed to install an electrical outlet under the sink to plug in the new Waste King disposer. Converting a hardwired electrical connection to an [...]
This project is continued from Part 1. The cabinet is emptied for easy access to the broken garbage disposer. The garbage disposer is removed by shutting off the circuit breaker then disconnecting the discharge elbow, dishwasher drain hose (if present), 3-bolt mount and hardwired electrical connection. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
This article is continued from Part 1. I’m ready to begin wiring in the ToggleLinc for the porch lights and reconnect the 2nd light switch for the interior light in the double gang box. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
I’ve always liked the concept of Home Automation – it’s really cool (and helpful) to turn on/off lights and appliances remotely over the Internet, from my iPhone or because I’m too lazy to walk over and turn flip a switch! The Insteon® technology by SmartLabs® uses the existing 120VAC electrical wiring in the home and [...]
The house was a bit warm so I set the temperature a couple of degrees lower on the thermostat. A short while later, I noticed that no air was coming from the registers and the outside compressor unit wasn’t running. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
Recent Comments