This project is continued from Part 5. It’s very important to assemble and glue the solvent weld union fittings in the correct order because you only get one chance to do it right! The large white union nut must be slipped onto the upper section of PVC pipe and held in place so it doesn’t [...]
This project is continued from Part 4. Having removed the old sewage check valve and installed a new PVC discharge pipe on the sewage pump, the new A.Y. McDonald 2068S silent check valve can be installed to eliminate the water hammer in the basement bathroom. The A.Y. McDonald 2068S silent check valve uses compression fittings [...]
This project is continued from Part 1. The cabinet is emptied for easy access to the broken garbage disposer. The garbage disposer is removed by shutting off the circuit breaker then disconnecting the discharge elbow, dishwasher drain hose (if present), 3-bolt mount and hardwired electrical connection. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
This repair is continued from Part 3. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
This repair is continued from Part 2. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
This repair is continued from Part 1. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
This project explains how to dissemble the P-trap to recover an item accidentally dropped down the sink drain, such a piece of jewelry. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
This repair is continued from Part 3. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
This repair is continued from Part 2. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
This repair is continued from Part 1. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
Recent Comments