Tag Archive | "Home Automation"

How to configure a Static IP address for the ISY-99i Home Automation Controller – Part 1

Saturday, June 20, 2009

2 Comments

How to configure a Static IP address for the ISY-99i Home Automation Controller – Part 1

This article is a step-by-step tutorial showing how to configure a static IP address and port forwarding for secure Internet access to the ISY-99i Home Automation Controller. Problem with UPnP and Internet Access The Linksys WRT-54G WiFi router supports Universal Plug-n-Play (UPnP), a feature that automatically detects and configures Internet access for the ISY-99i. However, [...]

Continue reading...

How to Wire a Motion Activated Floodlight with an Insteon In-LineLinc Relay

Wednesday, June 3, 2009

1 Comment

How to Wire a Motion Activated Floodlight with an Insteon In-LineLinc Relay

This article illustrates how to re-wire a Heath® Zenith motion activated floodlight, model SL-5412, with an Insteon In-LineLinc Relay for automation of home lighting. You can also purchase a floodlight kit directly from SmartHome.com including the In-LineLinc. But if you want to retro-fit an existing floodlight or prefer a wider range (150° or 180°) PIR [...]

Continue reading...

Automate Exterior Lights with an Insteon Wireless Motion Sensor

Sunday, May 31, 2009

2 Comments

Automate Exterior Lights with an Insteon Wireless Motion Sensor

My front porch has pendant lights suspended by chains and is controlled by a standard light switch. I automated the porch lights with Insteon home automation controls purchased from SmartHome.com. I covered the Insteon ToggleLinc light switch installation in this article. The related ISY-99i home automation controller is discussed here. The Insteon Motion Sensor is [...]

Continue reading...

Install a SmartHome ToggleLinc Remote Control Light Switch – Part 2

Saturday, May 30, 2009

1 Comment

Install a SmartHome ToggleLinc Remote Control Light Switch – Part 2

This article is continued from Part 1. I’m ready to begin wiring in the ToggleLinc for the porch lights and reconnect the 2nd light switch for the interior light in the double gang box. Ground Wire Connections I begin by making the grounding wire connections: The NM 14/2 ground wires from the house wiring are [...]

Continue reading...

Install a SmartHome ToggleLinc Remote Control Light Switch – Part 1

Saturday, May 30, 2009

6 Comments

Install a SmartHome ToggleLinc Remote Control Light Switch – Part 1

I’ve always liked the concept of Home Automation – it’s really cool (and helpful) to turn on/off lights and appliances remotely over the Internet, from my iPhone or because I’m too lazy to walk over and turn flip a switch! The Insteon® technology by SmartLabs® uses the existing 120VAC electrical wiring in the home and [...]

Continue reading...
Page 2 of 212