This project is continued from Part 5. View of the ice and water shield, new step flashing and shingles as the roofer works his way around the chimney corner. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
Tag Archives | installation
How to Repair a Leaky Chimney – Part 5
This project is continued from Part 4. The Owens Corning WeatherLock® Mat Waterproofing Underlayment (ice and water shield) is installed against the chimney and the roof deck. Notice how the roofers slipped water shield behind the first piece of step flashing and under the shingle to shed water. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
How to Install an Air Duct in a Suspended Drywall Ceiling – Part 2
This project is continued from Part 1. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
How to Install an Air Duct in a Suspended Drywall Ceiling – Part 1
This project illustrates how to install a new HVAC air vent and ductwork in a suspended drywall ceiling. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
How to Add a Room Air Duct with Speedi-Boot™ – Part 3
This project is continued from Part 2. The Speedi-Boot™ air vent is fastened by nailing the feet of the telescoping arms to the wood joists with the pre-installed nails (you can also use screws). This is where the Speedi-Boot really shines compared to a raw vent boot where I’d have to measure, saw and mount [...]
How to Add a Room Air Duct with Speedi-Boot™ – Part 2
This project is continued from Part 1. The new 4″x8″air vent will compliment an existing 6″x10″ air vent in my upstairs office. The computers and networking equipment generate a lot of heat and extra cooling is needed in the summer. On the other hand, the heat is welcome in the winter and I’ll close the [...]
How to Add a Room Air Duct with Speedi-Boot™ – Part 1
This project explains how to install an HVAC air vent for improved heating and cooling using the Speedi-Boot™ air vent. Speedi-Boot is easy and fast to install and solves many vent installation challenges. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
How to Add a Room Air Duct for Heating & Cooling – Part 2
This project is continued from Part 1. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
How to Wire Two Floodlights to an In-LineLinc Relay
My garage has a motion sensor floodlight on the corner by the driveway. I upgraded the garage floodlights by: Installing an Insteon In-LineLinc Relay for home automation. Adding a 2nd slaved floodlight at the other end of the garage. The slaved floodlight operates with the primary motion floodlight under control of the In-LineLinc. The details [...]
How to Wire a Motion Activated Floodlight with an Insteon In-LineLinc Relay
This article illustrates how to re-wire a Heath® Zenith motion activated floodlight, model SL-5412, with an Insteon In-LineLinc Relay for automation of home lighting. You can also purchase a floodlight kit directly from SmartHome.com including the In-LineLinc. But if you want to retro-fit an existing floodlight or prefer a wider range (150° or 180°) PIR [...]
Recent Comments