This project is continued from Part 1. Shut Off The Electricity Before doing any work, I verified the wire was “live” with the non-contact voltage detector. The purpose here was two fold: 1) To confirm the battery operated voltage detector was working; and 2) To watch the detector go silent when the electricity is shut […]
Tag Archives | junction box
This project explains how to repair a broken or damaged 120VAC house electrical wire by splicing the wire with a new span of Romex® NM 14/2 electrical cable. The technique is illustrated in the following diagram: This splice repair technique is useful for fixing damage when there’s not enough slack in the electrical cable to […]
My garage has a motion sensor floodlight on the corner by the driveway. I upgraded the garage floodlights by: Installing an Insteon In-LineLinc Relay for home automation. Adding a 2nd slaved floodlight at the other end of the garage. The slaved floodlight operates with the primary motion floodlight under control of the In-LineLinc. The details […]
This update describes the heat, cooling and ventilation system for the basement bathroom. Click here if you missed Part 16. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
This is a continuation of the wiring for the vanity light and switch from Part 15 of this series. In this installment, I explain how to install the wire junction box and mount the vanity light to the wall. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
Finishing a basement bathroom – wiring the GFCI electrical outlet and vanity light switch. This project is continued from the wiring for the vanity light began in Part 14. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
Finishing a Basement Bathroom – sewage basin high water alarm installation and wiring. This project is continued from Part 10. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.