HandymanHowto.com » network diagram

Mobotix D24M-SEC Network Camera – Internet Access

Bob Jackson — Sun, 22 Aug 2010 22:54:31 +0000

If you missed the prior installment of this project, click here to read about the flash memory upgrade. This tutorial explains how to configure the Linksys WRT54G router and Mobotix D24M network camera for Internet access in both secure (SSL/https) and non-secure modes (http). This configuration enables secure web browser access to the camera from [...]

Mobotix D24M-SEC Network Camera Setup – Part 3

Bob Jackson — Sun, 22 Aug 2010 22:06:36 +0000

This project is continued from Part 2. Quick Installation Wizard (continued) Enter the IP address for your preferred DNS servers next. The DNS servers I use are: OpenDNS 208.67.222.222, 208.67.220.220 and Level 3 at 4.2.2.1 The camera network configuration is now finished. Print the configuration summary screen. Click Store Configuration to save it to the [...]

Mobotix D24M-SEC Network Camera Setup – Part 2

Bob Jackson — Sun, 22 Aug 2010 22:02:16 +0000

This project is continued from Part 1. Quick Installation Wizard (continued) I strongly recommend selecting a new password for the admin user login. Choose a strong password having a mix of upper and lower case characters and digits. Be sure to write the new password down and keep it in a safe place. Static LAN [...]

How to Install a Panasonic Network Camera – Part 3

Bob Jackson — Sat, 25 Jul 2009 23:28:55 +0000

This series continued from Part 2. Now it’s time to connect the camera to the network and configure the camera. Panasonic Network Camera Customer Support The Panasonic Global Support web site has the complete documentation and firmware for all Panasonic network cameras. The Panasonic USA Support web site is also very helpful, but not quite [...]

How to Install a Panasonic Network Camera – Part 2

Bob Jackson — Thu, 23 Jul 2009 01:20:52 +0000

This is continued from Part 1. Network Camera Internet Access The performance of the Panasonic Network Camera model #BB-HCM531A is quite good in a variety of lighting conditions. The camera is accessed and controlled via a web browser over the home network or Internet. This is an indoor scene as viewed in a web browser [...]

How to Install a Panasonic Network Camera – Part 1

Bob Jackson — Wed, 22 Jul 2009 01:33:40 +0000

This tutorial illustrates how to choose and configure a Panasonic IP Network Camera. The Panasonic IP Network Camera product line packs a lot of features into a small and affordable package. An “IP Network Camera” means the camera is controlled and viewed over the local LAN or Internet connection with any web browser, including an [...]

How to configure a Static IP address for the ISY-99i Home Automation Controller – Part 2

Bob Jackson — Sat, 20 Jun 2009 18:43:09 +0000

This tutorial is continued from Part 1. 6: Update ISY-99i Configuration on the Network Diagram Update the ISY-99i entries on network diagram with your values for the following parameters: ISY-99i Static IP Address: 192.168.2.200 Netmask: 255.255.255.0 Gateway: 192.168.2.1 (IP address of the Linksys router) DNS Server: 192.168.2.1 (IP address of the Linksys router) HTTPS Port: [...]

How to configure a Static IP address for the ISY-99i Home Automation Controller – Part 1

Bob Jackson — Sat, 20 Jun 2009 18:38:57 +0000

This article is a step-by-step tutorial showing how to configure a static IP address and port forwarding for secure Internet access to the ISY-99i Home Automation Controller. Problem with UPnP and Internet Access The Linksys WRT-54G WiFi router supports Universal Plug-n-Play (UPnP), a feature that automatically detects and configures Internet access for the ISY-99i. However, [...]