HandymanHowto.com » port forwarding

Mobotix Network Camera: How to use IP Notify and HTTP API – Part 3

Bob Jackson — Sun, 28 Aug 2011 23:09:18 +0000

This project is continued from Part 2. E-Mail Notice Action The Camera_Times Time Table will restrict video motions e-mail notices to Closed business hours by associating it with Messaging Action for video motion events. The process steps in this section are: Navigate to: Setup → Event Control → Action Group Overview and select the Camera_Times [...]

Mobotix Network Camera: How to use IP Notify and HTTP API – Part 2

Bob Jackson — Sun, 28 Aug 2011 23:09:12 +0000

This project is continued from Part 1. Mobotix IP Notify Profiles IP Notify Profiles are used to configure network messages which the camera can send to itself or other computers running locally or over the Internet. In this tutorial, the camera will send IP Notify events to itself to change recording modes for Open and [...]

Mobotix Network Camera: How to use IP Notify and HTTP API – Part 1

Bob Jackson — Sun, 28 Aug 2011 23:08:28 +0000

This project explains how to change the Mobotix D24M-SEC IP network camera recording mode using the HTTP API with IP Notify Events and Time Tasks. The camera recording mode is changed from Continuous Recording to Video Motion Event Recording based on time of day to match the business open and closing hours. E-mails with a [...]

How To Configure a Comcast Business Class Static IP Address

Bob Jackson — Fri, 19 Aug 2011 22:29:03 +0000

This tutorial explains how to configure a static IP address on a Comcast Business Class SMC8014 gateway and a Linksys WiFi router to enable remote access to network clients from the Internet. The SMC8014 gateway is configured for “bridge mode” by disabling the normal routing, firewall and DHCP functions. A static IP address is assigned [...]

Mobotix D24M-SEC Network Camera – Internet Access

Bob Jackson — Sun, 22 Aug 2010 22:54:31 +0000

If you missed the prior installment of this project, click here to read about the flash memory upgrade. This tutorial explains how to configure the Linksys WRT54G router and Mobotix D24M network camera for Internet access in both secure (SSL/https) and non-secure modes (http). This configuration enables secure web browser access to the camera from [...]

Mobotix D24M-SEC Network Camera Setup – Part 3

Bob Jackson — Sun, 22 Aug 2010 22:06:36 +0000

This project is continued from Part 2. Quick Installation Wizard (continued) Enter the IP address for your preferred DNS servers next. The DNS servers I use are: OpenDNS 208.67.222.222, 208.67.220.220 and Level 3 at 4.2.2.1 The camera network configuration is now finished. Print the configuration summary screen. Click Store Configuration to save it to the [...]

Mobotix D24M-SEC Network Camera Setup – Part 2

Bob Jackson — Sun, 22 Aug 2010 22:02:16 +0000

This project is continued from Part 1. Quick Installation Wizard (continued) I strongly recommend selecting a new password for the admin user login. Choose a strong password having a mix of upper and lower case characters and digits. Be sure to write the new password down and keep it in a safe place. Static LAN [...]

Mobotix D24M-SEC Network Camera Setup – Part 1

Bob Jackson — Sun, 22 Aug 2010 21:59:18 +0000

This step-by-step tutorial explains how to configure the Mobotix D24M-SEC IP camera. The Mobotix D24M is a professional grade system that requires some effort to read the ~150 page D24M Camera Manual and ~300 page Software Camera Manual and experiment with different camera options. Or you can follow these quick instructions for this camera configuration [...]

How to Install a Panasonic Network Camera – Part 3

Bob Jackson — Sat, 25 Jul 2009 23:28:55 +0000

This series continued from Part 2. Now it’s time to connect the camera to the network and configure the camera. Panasonic Network Camera Customer Support The Panasonic Global Support web site has the complete documentation and firmware for all Panasonic network cameras. The Panasonic USA Support web site is also very helpful, but not quite [...]

How to configure a Static IP address for the ISY-99i Home Automation Controller – Part 2

Bob Jackson — Sat, 20 Jun 2009 18:43:09 +0000

This tutorial is continued from Part 1. 6: Update ISY-99i Configuration on the Network Diagram Update the ISY-99i entries on network diagram with your values for the following parameters: ISY-99i Static IP Address: 192.168.2.200 Netmask: 255.255.255.0 Gateway: 192.168.2.1 (IP address of the Linksys router) DNS Server: 192.168.2.1 (IP address of the Linksys router) HTTPS Port: [...]