This SquareTrade.com Warranty Review describes my great experience when filing a warranty claim to repair my Frigidaire® Gallery dishwasher, model FGHD2433KF1. A teardown of the old dishwasher circulation pump follows that revealed rusted ball bearings due to leaking pump shaft seals. Frigidaire® Gallery Dishwasher FGHD2433KF1 I purchased and installed a Frigidaire® Gallery dishwasher, model FGHD2433KF1 on [...]
This project is continued from Part 8. The new porch roof details are illustrated with the stucco apron/headwall flashing and counter flashing installation steps. A section of rotted soffit and fascia board are also replaced. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
This project is continued from Part 3. At this point in the project, the old sewage check valve has been removed and the sewage pump pulled out of the basin. The old ~4 foot tall sewage pump discharge pipe will now be removed and new discharge pipe fitted to the pump. Copyright © 2013 HandymanHowTo.com [...]
This project is continued from Part 1. The 10 year old multi-turn stop valve developed a slow leak at the white valve stem when I turned the water on after replacing a toilet fill valve. I tightened the packing nut a 1/4 turn with wrench, however it continued to leak a drop or two per [...]
This project explains how to replace a leaky multi-turn stop valve for a toilet water supply with a new Brasscraft® G2 Series 1/4 Turn Ball Stop Valve. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
This project is continued from Part 6. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
This project is continued from Part 5. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
A HandymanHowTo.com reader attempted to repair his leaky shower drain as described in Parts 1 to 4 of this project series, but was frustrated because the shower drain kept leaking. He realized that we both live in the Atlanta, GA area – only 30 minutes apart in fact – and asked if I’d help fix [...]
This project is continued from Part 3. Having cut the mortises for the new Hager BB1279 ball bearing door hinges, I’m ready to attach the new hinges to the door. A long aluminum channel that doubles as a rip fence to cut plywood with my circular saw is used to align the hinges. Copyright © [...]
This project is continued from Part 2. With the French Door removed from the doorway, placed in a jig on it’s side to hold it securely, and the old hinges removed, I’m now ready to install the new Hager BB1279 ball bearing hinges. The Hager hinge has square leaves, but the mortise is radiused (i.e. [...]
Recent Comments