HandymanHowto.com » Rubber Manufacturers Association http://www.handymanhowto.com Home improvement, maintenance and repair projects. Sat, 21 Jan 2012 13:17:38 +0000 en hourly 1 http://wordpress.org/?v=3.3.1 How to Fix a Flat Tire – Part 2 http://www.handymanhowto.com/2010/02/13/how-to-fix-a-flat-tire-part-2/ http://www.handymanhowto.com/2010/02/13/how-to-fix-a-flat-tire-part-2/#comments Sat, 13 Feb 2010 18:15:51 +0000 Bob Jackson http://www.handymanhowto.com/?p=4351

This project is continued from Part 1. This is the Victor plug repair kit. Note the puncture hole at the red arrow. The puncture hole is cleaned with the rasp tool by drawing it back and forth several times to remove any dirt, mud or grease that would interfere with a clean bond between the [...]

Copyright © 2012 HandymanHowTo.com   Reproduction strictly prohibited.

]]> http://www.handymanhowto.com/2010/02/13/how-to-fix-a-flat-tire-part-2/feed/ 1 How to Fix a Flat Tire – Part 1 http://www.handymanhowto.com/2010/02/13/how-to-fix-a-flat-tire-part-1/ http://www.handymanhowto.com/2010/02/13/how-to-fix-a-flat-tire-part-1/#comments Sat, 13 Feb 2010 18:15:09 +0000 Bob Jackson http://www.handymanhowto.com/?p=4299

This article explains how to plug a puncture hole in flat tire. The other day I drove about 2 miles between office buildings, briefly went inside the office and returned to my car about 5 minutes later to find the driver’s side rear tire was completely flat! I was asking myself “Now how did that [...]

Copyright © 2012 HandymanHowTo.com   Reproduction strictly prohibited.

]]> http://www.handymanhowto.com/2010/02/13/how-to-fix-a-flat-tire-part-1/feed/ 1