This project is continued from Part 3. At this point in the project, the old sewage check valve has been removed and the sewage pump pulled out of the basin. The old ~4 foot tall sewage pump discharge pipe will now be removed and new discharge pipe fitted to the pump. Copyright © 2013 HandymanHowTo.com [...]
Tag Archives | float switch
This project is continued from Part 1. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
In the early 1990′s, I bought a home in south Florida and did the usual routine of hiring a Home Inspection company. Home Inspectors are worth every penny and among the many items they examine, will check the heating and cooling operation of the air conditioning units – air temperatures and general condition of the [...]
The house was a bit warm so I set the temperature a couple of degrees lower on the thermostat. A short while later, I noticed that no air was coming from the registers and the outside compressor unit wasn’t running. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.
This project is continued from Part 12. The bathroom vanity and plumbing is installed in this episode of the project series. Copyright © 2013 HandymanHowTo.com Reproduction strictly prohibited.